Bakers Pride Oven FKM-FC Manuel d'utilisateur télécharger pdf (Page 17)

Electric Pressure Fryer Operation

Use only high-quality shortening that has low moisture content, a high smoke

point and no additives.

3. The digital timer has a STIR OIL function that operates in one of four reconfigurable modes. If the

timer needs to be reconfigured, follow step a. If the timer does not need to be reconfigured, follow

step b.

a. Press and hold the ALARM button and at the same time place the FILTER/OFF/FRY switch

in the FRY position. The display will show the word “STIR” until the ALARM button is

released. When the button is release the display will show the current configuration mode. To

change this mode select the timer key that represents the mode you want. Refer to the table

below:

KEY DISPLAY MODE DESCRIPTION

A -AL-

New or unchanged timer. Alarm sounds at the end of the internal 6

minute countdown.

B -OFF

Defeats the STIR OIL function. Timer operates as if it had no STIR

OIL function.

C PrES STIR OIL function for all Pressure Fryers.

D LiFT STIR OIL function for all Autolift Fryers.

The display will now show the selected mode. Proceed to step c.

b. Once the fryer is filled with shortening, place the FILTER/OFF/FRY switch in the FRY

position.

c. Unless the STIR OIL function is operating in the –OFF mode, the digital timer activates a

STIR OIL function and begins an internal six minute countdown (not displayed). At the end of

the internal countdown, the display shows the words “STIR” then “OIL” in .5 second intervals

and the alarm sounds. Depress the ALARM button and stir the shortening freely while it is

heating.

IMPORTANT! Before the first cooking operation each day, stir the shortening freely while it is

heating to provide a balanced shortening temperature for excellent results with the first

cooking. Failure to do this can result in a crusty skin on the product surface with an

undercooked product internally. In addition, in some cases, failure to stir the shortening while

it is initially heating may cause the HI-LIMIT safety device to disable the power due to a false

overtemperature condition.

4. Set the thermostat to the desired cook temperature. The temperature light will go on. When the

temperature is reached, the light will go off. The light will continue to cycle on and off as the fryer

maintains the set temperature.

5. Press and hold the TIME SELECT arrow buttons on the digital timer until the desired cook time is

displayed or recall a preset time by quickly pressing the appropriate preset button.

6. The shortening will heat and begin to reach the fill mark inside the pot. Add more shortening as

required to reach the fill mark.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 59 60

Pas de commentaire

Bakers Pride Oven FKM-FC Manuel d'utilisateur Page 17